5.6 Check the operation of A-AUTO 50

In A-AUTO we called the network a unit of processing for scheduling and execution control of your business.
Check operates now using four network ID of CHKNET01 ~ CHKNET04.
Overview of the operation check for the network are as follows:

CHKNET01
It has an attribute called hold attribute.
It will start executing by the operator instructions.
CHKNET02
CHKNET01 is a preceding network.
Network CHKNET02 is executed after the CHKNET01 was successful.
CHKNET03
CHKNET01 is a preceding network.
Network CHKNET03 is executed after the CHKNET01 was successful.
CHKNET03 is a network for operation check of the abnormal termination occurs.
For this reason, CHKNET03 is the setting for abnormal termination.
CHKNET04
CHKNET03 is a preceding network.
Network CHKNET04 is executed after the CHKNET03 was successful.
5.6.1. To start the CHKNET01 by release
When you left-click the right or left edge of the CHEKNET01 the chart screen is displayed menu, Click on the release.
* Note: When a string of network ID left-click, another screen is displayed.

release

Release dialog is displayed. I click the Execute button.
And “Send the command. Are you sure?” Message box of is displayed, click the [OK] button.

Chknet01_release_OK

The following message box is displayed, please close.

Chknet01_release_success

5.6.2. Check the state transition of the operation check for network
In the initial setting of the monitoring screen redraws automatically every 60 seconds.
In the operation check, please display update manually by clicking on the icon display update every 10 seconds.This is to confirm the change of state.

refrash

CHKNET01 will change to green after a while.

Chknet01_execute

Check the following
– CHKNET01 is completed successfully (it turns blue)
– following CHKNET02 and CHKNET03 is running (it turns green)

Chknet01_normalend

Then, CHKNET02 to successful completion (turns blue), CHKNET03 aborts (turns red).
Alert List window is displayed when the network is abnormal termination.

Chknet03_abnoramalend

Next, click the CHKNET03 in Alert List dialog.

5.6.3. Check the details of the abnormally terminated network
Alert dialog is displayed.
* In the alert dialog, to display the detailed information of the abnormal termination networks.

Chknet03_job_detaile

Next, click on the “Details Job Info” button in the alert dialog, check the detailed information of the abnormal termination job.

It is displayed “Details Job Info” tab of “Detailed Network Info” dialog
CHKNET03 is set to perform two of batch jobs within a network.Check the status of the first one of the job BSPCHK3, it is “abnormal termination”.

Chknet03_job_list

Next, click the BSPCHK3 of “Details Job Info” tab.

5.6.4. Check the details of the abnormally terminated job
“Network Monitor-Detailed Job Info” dialog is displayed.
Check the detailed job execution result in this screen.

Chknet03_job_detaile

Next, click on the “View Job Log” button in the “Network Monitor-Detailed Job Info” dialog.

5.6.5. Job log display of abnormal termination job
Check the display of the job log.

Chknet03_abnoramal_joblog

5.6.6. Re-run of the abnormal termination network
The abnormally terminated network will rerun eliminate the cause of the abnormal termination.
Described the Re-run procedure.

BSPCHK3 has intentionally abnormal termination.
Replace the batch file with the following procedure.

(1) Show the following directory in Windows Explorer.
C:BSP\AUW\INSTALL\TEMPSCRIPT

chknet03_BSPCHK3_rename1

(2) rename the BBSPCHK3.bat to BSPCHK3@.bat.

chknet03_BSPCHK3_rename2

By renaming “C:BSP\AUW\INSTALL\PRIMSCRIPT\BSPCHK3.bat” it is executed at the time of reruns.

(3) Left-click the right edge of the CHEKNET03 in the flow display screen, and click Start in the menu.
Chknet03_restart

* “Start” command is a command to execute one of the network (rerun).

(4) [Start] dialog is displayed, click the Execute button.
In addition, “Send the command. Are you sure?” Message box of is displayed, click the [OK] button.

Chknet03_restart2

CHKNET03 is running (it turns green).

Chknet03_restart3

CHKNET03 and CHKNET04 to successful completion (it turns blue).

Chknet04_execute

Chknet04_noramalend

When you view in the List screen, to display the state as shown in the figure below.

Chknet04_noramalend_list

Operation check is completed.