4.2. Port open settings

To be able to use the Web client from outside the installed computer, you will need to open the port number used by the A-AUTO Web Server that was set during installation.
Open the “Windows Firewall with Advanced Security” screen to set

* To view the “Windows Firewall with Advanced Security” screen
(1) “Ctrl”+”R”key. show the “Run” dialog box.
(2) input “WF.msc″.

(1) Click the Left side “Inbound Rules”, and click the right side “New Rule…”.
–> “New Inbound Rule Wizard” opens.

New Inbound Rule Wizard

(2) Select “Port”, and click “Next>”.

New Inbound Rule Wizard-Rule Type

(3) Select “TCP” and “Specific local ports”, and set the A-AUTO Web Server port number that you specified during installation. Click “Next>”.

New Inbound Rule Wizard-Protocol and ports

(4) Select “Allow the connection”, and click “Next>”.

New Inbound Rule Wizard-Action

(5) Check all of the check box, and click “Next>”.

New Inbound Rule Wizard-profile

(6) Name Type column “A-AUTO_WebServer_Port”, press the [Finish (F)], to register the setting.

New Inbound Rule Wizard-Name

(7) Similarly, implementing a set of (1)~(6) to “Outbound Rules”